Difference between revisions of "Archived/Tunnelling"
m (Archived page)
|Line 105:||Line 105:|
Revision as of 10:07, 21 October 2016
Note: the Xapi docs have been updated here: http://xapi-project.github.io/xapi/design/tunnelling.html
Tunnelling API design
To isolate network traffic between VMs (e.g. for security reasons) one can use VLANs. The number of possible VLANs on a network, however, is limited, and setting up a VLAN requires configuring the physical switches in the network. GRE tunnels provide a similar, though more flexible solution. This document proposes a design that integrates the use of tunnelling in the XenAPI. The design relies on the recent introduction of the Open vSwitch in XCP, and requires an Open vSwitch (OpenFlow) controller (further referred to as the controller) to set up and maintain the actual GRE tunnels.
We suggest following the way VLANs are modelled in the datamodel. Introducing a VLAN involves creating a Network object for the VLAN, that VIFs can connect to. The `VLAN.create` API call takes references to a PIF and Network to use and a VLAN tag, and creates a VLAN object and a PIF object. We propose something similar for tunnels; the resulting objects and relations for two hosts would look like this:
PIF (transport) -- Tunnel -- PIF (access) \ / VIF Network -- VIF PIF (transport) -- Tunnel -- PIF (access) / \ VIF
New `tunnel` class:
- `string` `uuid` (read-only)
- `PIF ref` access_PIF` (read-only)
- `PIF ref` transport_PIF` (read-only)
- `(string -> string) map` `status` (read/write); owned by the controller, containing at least the key `active`, and `key` and `error` when appropriate (see below)
- `(string -> string) map` `other_config` (read/write)
- `tunnel ref` `create` `(PIF ref, network ref)`
- `void` `destroy` `(tunnel ref)`
New fields in PIF class (automatically linked to the corresponding `tunnel` fields):
- `PIF ref set` `tunnel_access_PIF_of` (read-only)
- `PIF ref set` `tunnel_transport_PIF_of` (read-only)
For clients to determine which network backend is in use (to decide whether tunnelling functionality is enabled) a key `network_backend` is added to the `Host.software_version` map on each host. The value of this key can be:
- `bridge`: the Linux bridging backend is in use;
- `openvswitch`: the Open vSwitch backend is in use.
- The user is responsible for creating tunnel and network objects, associating VIFs with the right networks, and configuring the physical PIFs, all using the XenAPI/CLI/XC.
- The `tunnel.status` field is owned by the controller. It may be possible to define an RBAC role for the controller, such that only the controller is able to write to it.
- The `tunnel.create` message does not take a tunnel identifier (GRE key). The controller is responsible for assigning the right keys transparently. When a tunnel has been set up, the controller will write its key to `tunnel.status:key`, and it will set `tunnel.status:active` to `"true"` in the same field.
- In case a tunnel could not be set up, an error code (to be defined) will be written to `tunnel.status:error`, and `tunnel.status:active` will be `"false"`.
- Fails with OPENVSWITCH_NOT_ACTIVE if the Open vSwitch networking sub-system is not active (the host uses linux bridging).
- Fails with IS_TUNNEL_ACCESS_PIF if the specified transport PIF is a tunnel access PIF.
- Takes care of creating and connecting the new tunnel and PIF objects.
- Sets a random MAC on the access PIF.
- IP configuration of the tunnel access PIF is left blank. (The IP configuration on a PIF is normally used for the interface in dom0. In this case, there is no tunnel interface for dom0 to use. Such functionality may be added in future.)
- The `tunnel.status:active` field is initialised to `"false"`, indicating that no actual tunnelling infrastructure has been set up yet.
- Calls `PIF.plug` on the new tunnel access PIF.
- Calls `PIF.unplug` on the tunnel access PIF.
- Destroys the `tunnel` and tunnel access PIF objects.
`PIF.plug` on a tunnel access PIF:
- Fails with TRANSPORT_PIF_NOT_CONFIGURED if the underlying transport PIF has `PIF.ip_configuration_mode = None`, as this interface needs to be configured for the tunnelling to work. Otherwise, the transport PIF will be plugged.
- XAPI requests `interface-reconfigure` to "bring up" the tunnel access PIF, which causes it to create a local bridge.
- No link will be made between the new bridge and the physical interface by `interface-reconfigure`. The controller is responsible for setting up these links. If the controller is not available, no links can be created, and the tunnel network degrades to an internal network (only intra-host connectivity).
- `PIF.currently_attached` is set to `true`.
`PIF.unplug` on a tunnel access PIF:
- XAPI requests `interface-reconfigure` to "bring down" the tunnel PIF, which causes it to destroy the local bridge.
- `PIF.currently_attached` is set to `false`.
`PIF.unplug` on a tunnel transport PIF:
- Calls `PIF.unplug` on the associated tunnel access PIF(s).
`PIF.forget` on a tunnel access of transport PIF:
- Fails with PIF_TUNNEL_STILL_EXISTS.
- Tunnels can only exist on top of physical/VLAN/Bond PIFs, and not the other way around. `VLAN.create` fails with IS_TUNNEL_ACCESS_PIF if given an underlying PIF that is a tunnel access PIF.
- As for VLANs, when a host joins a pool, it will inherit the tunnels that are present on the pool master.
- Any tunnels (tunnel and access PIF objects) configured on the host are removed, which will leave their networks disconnected (the networks become internal networks). As a joining host is always a single host, there is no real use for having had tunnels on it, so this probably will never be an issue.
- The controller tracks the `tunnel` class to determine which bridges/networks require GRE tunnelling.
- On start-up, it calls `tunnel.get_all` to obtain the information about all tunnels.
- Registers for events on the `tunnel` class to stay up-to-date.
- A tunnel network is organised as a star topology. The controller is free to decide which host will be the central host ("switching host").
- If the current switching host goes down, a new one will be selected, and GRE tunnels will be reconstructed.
- The controller creates GRE tunnels connecting each existing Open vSwitch bridge that is associated with the same tunnel network, after assigning the network a unique GRE key.
- The controller destroys GRE tunnels if associated Open vSwitch bridges are destroyed. If the destroyed bridge was on the switching host, and other hosts are still using the same tunnel network, a new switching host will be selected, and GRE tunnels will be reconstructed.
- The controller sets `tunnel.status:active` to `"true"` for all tunnel links that have been set up, and `"false"` if links are broken.
- The controller writes an appropriate error code (to be defined) to `tunnel.status:error` in case something went wrong.
- When an access PIF is plugged, and the controller succeeds to set up the tunnelling infrastructure, it writes the GRE key to `tunnel.status:key` on the associated tunnel object (at the same time `tunnel.status:active` will be set to `"true"`).
- When the tunnel infrastructure is not up and running, the controller may remove the key `tunnel.status:key` (optional; the key should anyway be disregarded if `tunnel.status:active` is `"false"`).
New `xe` commands (analogous to `xe vlan-`):